Photo: Gsparr86 · CC BY-SA 4.0
2WD robot car kit with Arduino
Everything for the robot car of the projects: chassis, two TT motors, ball caster, 4 × AA holder, Arduino Uno, L298N, HC-SR04 and wires.
See the price in the shop
Where to buy
Uzum MarketUzum Marketdagi qidiruv natijalari · Delivery on the seller’s terms · All of UzbekistanSee the price in the shopBuy
Prices and stock are set by the shops. The site sends you to the shop; you buy there.
In the kit
TT gear motor 1:48 with 65 mm wheelIn the simulator× 2
Ball caster 20 mmIn the simulator× 1
4 × AA battery holderIn the simulator× 1
Arduino Uno R3In the simulator× 1
L298N motor driver moduleIn the simulator× 1
HC-SR04 ultrasonic sensorIn the simulator× 1
Jumper wire set× 1
USB A–B cable for Arduino Uno× 1- Chassis decks, screws and spacers× 1
This is the robot that the site's projects build and the simulator shows: two decks, two TT gear motors with 65 mm wheels, a ball caster, an Arduino Uno with an L298N driver and an HC-SR04 at the front.
Before you buy
- Kits from different sellers differ. Check that the listing names every item in the list below.
- Batteries are almost never included: you need four AA cells.
- On some kits the motor wires are soldered already; on others you solder them or twist them and tape them.
Projects with this kit
First drive, obstacle-avoiding robot, keep-distance robot. With the line follower add-on: the line-following robot.
